General Keyboard Shortcut Keys

General keyboard shortcuts

• CTRL+C (Copy)
• CTRL+X (Cut)
• CTRL+V (Paste)
• CTRL+Z (Undo)
• DELETE (Delete)
• SHIFT+DELETE (Delete the selected item permanently without placing the item in the Recycle Bin)
• CTRL while dragging an item (Copy the selected item)
• CTRL+SHIFT while dragging an item (Create a shortcut to the selected item)
• F2 key (Rename the selected item)
• CTRL+RIGHT ARROW (Move the insertion point to the beginning of the next word)
• CTRL+LEFT ARROW (Move the insertion point to the beginning of the previous word)
• CTRL+DOWN ARROW (Move the insertion point to the beginning of the next paragraph)
• CTRL+UP ARROW (Move the insertion point to the beginning of the previous paragraph)
• CTRL+SHIFT with any of the arrow keys (Highlight a block of text)
• SHIFT with any of the arrow keys (Select more than one item in a window or on the desktop, or select text in a document)
• CTRL+A (Select all)
• F3 key (Search for a file or a folder)
• ALT+ENTER (View the properties for the selected item)
• ALT+F4 (Close the active item, or quit the active program)
• ALT+ENTER (Display the properties of the selected object)
• ALT+SPACEBAR (Open the shortcut menu for the active window)
• CTRL+F4 (Close the active document in programs that enable you to have multiple documents open simultaneously)
• ALT+TAB (Switch between the open items)
• ALT+ESC (Cycle through items in the order that they had been opened)
• F6 key (Cycle through the screen elements in a window or on the desktop)
• F4 key (Display the Address bar list in My Computer or Windows Explorer)
• SHIFT+F10 (Display the shortcut menu for the selected item)
• ALT+SPACEBAR (Display the System menu for the active window)
• CTRL+ESC (Display the Start menu)
• ALT+Underlined letter in a menu name (Display the corresponding menu)
• Underlined letter in a command name on an open menu (Perform the corresponding command)
• F10 key (Activate the menu bar in the active program)
• RIGHT ARROW (Open the next menu to the right, or open a submenu)
• LEFT ARROW (Open the next menu to the left, or close a submenu)
• F5 key (Update the active window)
• BACKSPACE (View the folder one level up in My Computer or Windows Explorer)
• ESC (Cancel the current task)
• SHIFT when you insert a CD-ROM into the CD-ROM drive (Prevent the CD-ROM from automatically playing)
• CTRL+SHIFT+ESC (Open Task Manager)

Dialog box keyboard shortcuts

If you press SHIFT+F8 in extended selection list boxes, you enable extended selection mode. In this mode, you can use an arrow key to move a cursor without changing the selection. You can press CTRL+SPACEBAR or SHIFT+SPACEBAR to adjust the selection. To cancel extended selection mode, press SHIFT+F8 again. Extended selection mode cancels itself when you move the focus to another control.

• CTRL+TAB (Move forward through the tabs)
• CTRL+SHIFT+TAB (Move backward through the tabs)
• TAB (Move forward through the options)
• SHIFT+TAB (Move backward through the options)
• ALT+Underlined letter (Perform the corresponding command or select the corresponding option)
• ENTER (Perform the command for the active option or button)
• SPACEBAR (Select or clear the check box if the active option is a check box)
• Arrow keys (Select a button if the active option is a group of option buttons)
• F1 key (Display Help)
• F4 key (Display the items in the active list)
• BACKSPACE (Open a folder one level up if a folder is selected in the Save As or Open dialog box)

Microsoft natural keyboard shortcuts

• Windows Logo (Display or hide the Start menu)
• Windows Logo+BREAK (Display the System Properties dialog box)
• Windows Logo+D (Display the desktop)
• Windows Logo+M (Minimize all of the windows)
• Windows Logo+SHIFT+M (Restore the minimized windows)
• Windows Logo+E (Open My Computer)
• Windows Logo+F (Search for a file or a folder)
• CTRL+Windows Logo+F (Search for computers)
• Windows Logo+F1 (Display Windows Help)
• Windows Logo+ L (Lock the keyboard)
• Windows Logo+R (Open the Run dialog box)
• Windows Logo+U (Open Utility Manager)

Accessibility keyboard shortcuts

• Right SHIFT for eight seconds (Switch FilterKeys either on or off)
• Left ALT+left SHIFT+PRINT SCREEN (Switch High Contrast either on or off)
• Left ALT+left SHIFT+NUM LOCK (Switch the MouseKeys either on or off)
• SHIFT five times (Switch the StickyKeys either on or off)
• NUM LOCK for five seconds (Switch the ToggleKeys either on or off)
• Windows Logo +U (Open Utility Manager)

Windows Explorer keyboard shortcuts

• END (Display the bottom of the active window)
• HOME (Display the top of the active window)
• NUM LOCK+Asterisk sign (*) (Display all of the subfolders that are under the selected folder)
• NUM LOCK+Plus sign (+) (Display the contents of the selected folder)
• NUM LOCK+Minus sign (-) (Collapse the selected folder)
• LEFT ARROW (Collapse the current selection if it is expanded, or select the parent folder)
• RIGHT ARROW (Display the current selection if it is collapsed, or select the first subfolder)

Shortcut keys for Character Map

After you double-click a character on the grid of characters, you can move through the grid by using the keyboard shortcuts:

• RIGHT ARROW (Move to the right or to the beginning of the next line)
• LEFT ARROW (Move to the left or to the end of the previous line)
• UP ARROW (Move up one row)
• DOWN ARROW (Move down one row)
• PAGE UP (Move up one screen at a time)
• PAGE DOWN (Move down one screen at a time)
• HOME (Move to the beginning of the line)
• END (Move to the end of the line)
• CTRL+HOME (Move to the first character)
• CTRL+END (Move to the last character)
• SPACEBAR (Switch between Enlarged and Normal mode when a character is selected)

Microsoft Management Console (MMC) main window keyboard shortcuts

• CTRL+O (Open a saved console)
• CTRL+N (Open a new console)
• CTRL+S (Save the open console)
• CTRL+M (Add or remove a console item)
• CTRL+W (Open a new window)
• F5 key (Update the content of all console windows)
• ALT+SPACEBAR (Display the MMC window menu)
• ALT+F4 (Close the console)
• ALT+A (Display the Action menu)
• ALT+V (Display the View menu)
• ALT+F (Display the File menu)
• ALT+O (Display the Favorites menu)

MMC console window keyboard shortcuts

• CTRL+P (Print the current page or active pane)
• ALT+Minus sign (-) (Display the window menu for the active console window)
• SHIFT+F10 (Display the Action shortcut menu for the selected item)
• F1 key (Open the Help topic, if any, for the selected item)
• F5 key (Update the content of all console windows)
• CTRL+F10 (Maximize the active console window)
• CTRL+F5 (Restore the active console window)
• ALT+ENTER (Display the Properties dialog box, if any, for the selected item)
• F2 key (Rename the selected item)
• CTRL+F4 (Close the active console window. When a console has only one console window, this shortcut closes the console)

Remote desktop connection navigation

• CTRL+ALT+END (Open the Microsoft Windows NT Security dialog box)
• ALT+PAGE UP (Switch between programs from left to right)
• ALT+PAGE DOWN (Switch between programs from right to left)
• ALT+INSERT (Cycle through the programs in most recently used order)
• ALT+HOME (Display the Start menu)
• CTRL+ALT+BREAK (Switch the client computer between a window and a full screen)
• ALT+DELETE (Display the Windows menu)
• CTRL+ALT+Minus sign (-) (Place a snapshot of the entire client window area on the Terminal server clipboard and provide the same functionality as pressing ALT+PRINT SCREEN on a local computer.)
• CTRL+ALT+Plus sign (+) (Place a snapshot of the active window in the client on the Terminal server clipboard and provide the same functionality as pressing PRINT SCREEN on a local computer.)

Microsoft Internet Explorer navigation

• CTRL+B (Open the Organize Favorites dialog box)
• CTRL+E (Open the Search bar)
• CTRL+F (Start the Find utility)
• CTRL+H (Open the History bar)
• CTRL+I (Open the Favorites bar)
• CTRL+L (Open the Open dialog box)
• CTRL+N (Start another instance of the browser with the same Web address)
• CTRL+O (Open the Open dialog box, the same as CTRL+L)
• CTRL+P (Open the Print dialog box)
• CTRL+R (Update the current Web page)
• CTRL+W (Close the current window)

CCNA 2ND Module Q & ANS

1  What action does a link-state router take immediately upon receipt of an LSP from  neighboring router?

floods the LSP to neighbors

calculates the SPF algorithm

runs the Bellman-Ford algorithm

computes the best path to the destination network

2. Why is it difficult for routing loops to occur in networks that use link-state routing?

Each router builds a simple view of the network based on hop count.

Routers flood the network with LSAs to discover routing loops.

Each router builds a complete and synchronized view of the network.

Routers use hold-down timers to prevent routing loops.

3  To achieve network convergence, what three steps does each link state router take? (Choose three.) use automatic summarization to reduce the size of routing tables

build a Link State Packet (LSP) containing the state of each directly connected link

flood the LSP to all neighbors, who then store all LSPs received in a database

discover neighbors and establish adjacencies using the hello packet sent at regular intervals

construct a complete map of the topology and compute the best path to each destination network

use the DUAL FSM to select efficient, loop-free paths, and insert routes into the routing table

4  A new network administrator is given the task of selecting an appropriate dynamic routing protocol for a software development company. The company has over 100 routers, uses CIDR and VLSM, requires fast convergence, and uses both Cisco and non-Cisco equipment. Which routing protocol is appropriate for this company?

RIP version 2

IGRP

EIGRP

OSPF

BGP

5  What two events will cause a link state router to send LSPs to all neighbors? (Choose two.)

30 second timer expires

whenever the network topology changes

immediately after the Bellman-Ford algorithm has run

immediately after the DUAL FSM has built the topology database

upon initial startup of router or routing protocol

6  What is the final step in the link state routing process?

successors are placed into the routing table

SPF computes best path to each destination network

LSPs are flooded to all neighbors to converge the network

DUAL algorithm is run to find best path to destination networks

7  What two statements correctly describe the link state routing process? (Choose two.)

each router in the area floods LSPs to all neighbors

all routers in the area have identical link state databases

LSPs use the reserved multicast address of 224.0.0.10 to reach neighbors

routing loops are prevented by running the Diffusing Update Algorithm (DUAL)

Reliable Transport Protocol (RTP) is the protocol used by for the delivery and reception of LSPs

8   Which database or table must be identical on all link-state routers within an area in order to construct an accurate SPF tree?

routing table

adjacency table

link-state database

neighbor table

9  What feature do modern link-state protocols provide to minimize processing and memory requirements?

splitting routing topologies into smaller areas

assigning lower process priorities to route calculations

using update timers to restrict routing updates

strict split horizon rules to reduce routing table entries

10  What speeds up convergence in a network using link-state routing?

updates triggered by network changes

updates sent at regular intervals

updates sent only to directly connected neighbors

updates that include complete routing tables

11  Which algorithm is run by link-state routing protocols to calculate the shortest path to destination networks?

DUAL

Dijkstra

Bellman-Ford

Diffie-Hellman

12  What are some of the advantages of using a link-state routing protocol instead of a distance vector routing protocol? (Choose two.)

The topology database eliminates the need for a routing table.

Frequent periodic updates are sent to minimize the number of incorrect routes in the topological database.

Routers have direct knowledge of all links in the network and how they are connected.

After the inital LSA flooding, they generally require less bandwidth to communicate changes in a topology.

Link-state protocols require less router processor power than distance vector protocols.

13  Which two routing protocols use Dijkstra’s shortest path first algorithm? (Choose two.)

RIPv1

RIPv2

IS-IS

BGP

EIGRP

OSPF

14  When are link-state packets sent to neighbors?

every 30 seconds

every 180 seconds

after the holddown time expires

when a link goes up or down

when a routing loop occurs

15  What are two advantages of using a link-state routing protocol instead of a distance vector routing protocol? (Choose two.)

The topology database eliminates the need for a routing table.

Each router independently determines the route to each network.

Link-state protocols require less router processor power than distance vector protocols.

After the inital LSP flooding, they generally require less bandwidth to communicate changes in a topology.

Frequent periodic updates are sent to minimize the number of incorrect routes in the topological database.

CCNA 2ND MODULE QUESTION & ANS

1  A network administrator has been told that the company IP address infrastructure must adhere to RFC 1918. What three IP address ranges from RFC 1918 could the administrator use on the network? (Choose three.)

10.0.0.0/8

127.0.0.0/8

169.254.0.0/16

172.16.0.0/12

192.168.0.0/16

209.165.201.0/27

2  What are two reasons to implement RIP version 2 rather than RIP version 1? (Choose two.)

RIP version 2 supports VLSM.

RIP version 2 supports more than 16 routers.

RIP version 2 supports classful (and not classless) routing.

RIP version 2 supports routing update authentication.

RIP version 2 supports multi-areas.

RIP version 2 uses the Dijkstra algorithm rather than the Bellman-Ford algorithm.

3  A network administrator installed four new routers that are running RIPv2. Router1 is a boundary router in the RIPv2 network and has a default route configured. Once the network has converged, the network administrator enters Router1(config-router)# default-information originate on Router1. How will this affect the network?

prevents Router1 from forwarding updates about networks that are not directly connected

causes all routers in the network to synchronize routing updates with Router1

forces Router1 to become the primary or designated router (DR) for updates

propagates the default route to all routers in the network

4  What is the maximum network diameter permitted by the default metric of RIPv2?

15 hops

16 hops

100 hops

120 hops

255 hops

5  What are two functions of the network command used when configuring routing protocols? (Choose two.)

identifies which networks will be included in the routing updates

identifies the hosts addresses that can be summarized in the network

used to list all addresses for remote and local networks

determines which subnet mask to apply to routing updates

determines which interfaces can send and receive routing updates

6  RIPv2 is the configured routing protocol on the routers in a network. The command Router(config-router)# no version 2 is entered on the routers. What effect does entering this command have on routing updates?

Subnet masks will be added to the routing updates.

Routing updates will be sent out using multicast address 224.0.0.9.

Version 1 and 2 updates will be received and the version 2 updates will not be sent.

The RIP routing process will be removed from the router and routing updates will not be forwarded.

7  How are RIP v1 and RIP v2 similar to one another? (Choose three.)

They both use hop count as a metric.

They both have the same metric value for infinite distance.

They both broadcast their updates to their neighbors.

They both send subnet mask information in their updates.

They both provide for authentication of update sources.

They both use split horizon to prevent routing loops.

8  What field was added to the RIP message header by RFC 1723 to add support for VLSM and CIDR?

subnet mask

destination port number

address family identifier

source and destination IP addresses

9 Refer to the exhibit. The exhibited network contains a mixture of Cisco and non-Cisco routers. The command debug ip rip was entered on the JAX router. All routers are running the same version of RIP. Router CHI and Router ORL are not able to reach the 192.168.1.16/28 network. What is a possible solution to this problem?

Enable split horizon in the network.

Configure RIPv2 on routers.

Add network 192.168.1.0 to the RIP configuration on the JAX router.

Configure JAX Fa0/0 as a passive interface.

Enable the Serial0/0/0 interface on the JAX router.

Change the IP address on the Fa0/0 interface of the JAX router to 192.168.1.1/24.

10 Which of the following are the address ranges of the private IP addresses? (Choose three.)

10.0.0.0 to 10.255.255.255

200.100.50.0 to 200.100.25.255

150.150.0.0 to 150.150.255.255

172.16.0.0 to 172.31.255.255

192.168.0.0 to 192.168.255.255

127.16.0.0 to 127.31.255.255